Wall panels have been used for centuries to stop moisture-related wall and ceiling damage. FRP wallboard is commonly used as they are cheaper than PVC panels. However, this is a myth. FRP might look cheaper, but compared to PVC wall panels, FRP is a costlier option in the long run. Many Americans are now switching from FRP and planning to buy PVC wall panel. The metamorphosis has come as PVC panels are loaded with advantages comparatively.

PVC is easier to install than FRP panels

Installing an FRP wallboard is a Herculean task. You would need adhesives, mounted rivets and wooden (plywood/drywall) backers for installing FRP panels. Two skilled laborers also need to be hired to install FRP panels. If you are running a business, you need to sacrifice an entire business day to complete your FRP installation. However, with PVC panels, the installation is much simpler. The Duramax PVC wall panels come in DIY kits with user-friendly guides. The vinyl panels have studs and hidden fasteners for installation. No backers, adhesives or any other additional materials are needed to install PVC wall panels. The lightweight panels are easy to install and with no visible hardware, it gives a smooth finishing. Installing the PVC panels is a one-person job and it gets completed within a few hours.

PVC panels are comparatively low-maintenance

Be careful of cleaning solutions if you are cleaning FRP panels. Manufacturers recommend cleaning FRP wallboard once every week. Also, during cleaning FRP panels, you need to be careful not to wet the wooden backers. Wood absorbs moisture quickly and the wet wooden backers would certainly damage the walls irreparably.

However, when you buy a PVC wall panel from Duramax, you don’t need to fret about cleaning and maintaining the vinyl walls. You can clean the PVC panels occasionally with a damp cloth and detergent. To maintain the vinyl’s original white and bright look, use a soft, non-abrasive cleaning agent. The vinyl panels have a smooth exterior surface that does not allow dirt, dust, or debris to accumulate at the corners or rest upon the surface. Vinyl walls seldom get dirty and are easy to clean.

PVC is 100% waterproof, but FRP has its limitations 

The wall panels need to be 100% waterproof to protect the ceilings and walls against moisture. FRP panels have limited moisture repelling properties. FRP panels are not moisture-resistant, the wooden, Drywall or OSB backers are quick to absorb moisture. If you end up spilling water over FRP panels, the backers would quickly absorb the moisture and with time, you will find the walls soggy and wet. On the other hand, PVC is 100% waterproof and comes without any backers for support. The vinyl walls offer 100% resistance to water, bacteria, molds and microbes. The moisture-repelling vinyl walls are hygienic due to their resistance to disease-causing bacteria and germs.

Duramax PVC Wall Panels come with certifications 

Did you know that you need to buy PVC wall panel that are certified by international bodies? Quality certifications are affirmations that should not get overlooked. Duramax PVC panels are CFIA-certified, ASTM-certified and FDA-compliant panels. Duramax professionals also offer free samples for quality checks. If you are interested in Duramax panels, book a free consultation with us or request a quote. Call us at 323-827-8948 or dial 323-827-8929.