Breweries wall panels – Fire-resistant and waterproof
Not all wall materials are moisture-proof and water-resistant. These conditions inside a brewery create a highly challenging atmosphere. Our USA-made vinyl panels are manufactured to endure these conditions.
Breweries
Breweries deal with high volume of liquids and high humidity which can be damaging to the walls depending on what type of material. They also require a sanitized work environment which means a wall material that is easy to clean would help.
Choose USA-made PVC panels for your brewery
Shop for high-quality PVC panels from Duramax e-store and save 40% on material cost and 50% on labor. Get the plastic panels at factory-direct prices within two weeks. Next, change your FRP panels and start investing in vinyl panels. High-quality PVC panels are a cost-effective investment in the long run. Vinyl prices might be slightly higher, but they are worth the investment. Initially, FRP might look cheap, but finally, you will end up paying more on repairs and maintenance.
Case Studies
Sade Brewery in Portland, OR
- Type: Brewery
- Location: Portland, OR
- Quantity: 314 sq. ft.
Mountaineer brewery had been a family business for over a millennium. When the business was passed down to Landon, he knew that some changes had to be made. Changes in the brewery house itself, not the product. When brewing any form of liquor, there is a lot of moisture involved. So when Landon decided to make his changes, he knew he had to take this into account.
He connected with other family breweries and soon found that most of them used a product made by Duramax's company. It seemed that their vinyl panels were just what Landon had been looking for to remodel his brewery room.
Googling their name, he found out that their product was specialized for use in areas exposed to excessive moisture. Constructed of top-quality Polyvinyl Chloride, or PVC, the smooth panels surface made it impervious to moisture retention.
The panels were also manufactured to fit together in a tongue-in-groove fashion, which prevented crevices or cracks. That meant that there was no place for the moisture to seep in and allow bacteria, mold, or mildew buildup.
Then, there were significant savings in the cost of labor with the installation of the vinyl panels. Being that they were constructed of ½ inch thick PVC, they were lightweight and easy to manage. In most cases, the panels could be installed in a matter of days, and usually by only one individual. This, in turn, would prove to cut down the installation cost and overall construction costs.
Not only would placing the panels cut down on the costs of the project, but Landon learned that there wasn’t a need type of prepping or reworking of the substructure, as the panels would attach to the existing studding as is.
Perhaps the main selling point for Landon was that the vinyl panels would be impervious to moisture in the brewery room and work to provide a clean and sanitary environment. That would allow him to create the brew that his family had been known for throughout the years. With all these features considered and the backing of a trustworthy and reliable company offering a quality manufactured product, Landon soon decided that Duramax was the best route to take. Their product was truly head and shoulders above their competition and had the track record to prove it. It was the only logical choice to make.
When looking to remodel or new construction, the only choice is Duramax vinyl panels. You will be glad you made the choice.
Progress Brewing, El Monte, California
- Type: Brewery
- Location: El Monte, CA
- Quantity: 200 sq. ft.
When Sebastian decided to offer his own homebrew on a larger scale, he knew that there would some major decisions to be made that would either help the business or sink it. After acquiring an out-of-business brewery house, he soon learned that he had his work cut out for him.
The first project he had to focus on was remodeling the brewing room, and that included re-vamping all the walls. The warehouse the old brewery was located had charm it was just an outdated sort of charm. Sebastian decided he want a clean and sanitary environment over charm—period!
He began looking at the products currently on the market that may aid him in his remodel. His primary concern was that of moisture—as a brewing room more often than not can create a significant amount of residual moisture.
When crunching the numbers, Duramax vinyl panels, overall, were much more economical than their competitors. Comprised of Polyvinyl Chloride, or PVC, they were lightweight and easily manageable when installing. According to the literature, one person could handle the install in a little as a few days, depending on the size of the area of installation.
The panels were manufactured of top-quality, superior material, that left them with a smooth finish. They were also constructed to fit snuggly together in a tongue-in-groove fashion. This form-fitting feature prevented any type of crevices or gaps, where moisture could penetrate and allow the buildup of bacteria, mold, or mildew—three of the major enemies to a brewery room.
Sebastian looked a little further into the product and learned that along with the vinyl panels being lightweight and easy to install, there was no special prepping or substrate construction needed, as they would attach directly to the existing studding. This feature was another overall construction cost-saver that made them even more attractive in Sebastian’s eyes.
However, what it all came back to for Sebastian was the fact that the panels were impervious to moisture which would go a long way towards both cleanliness and sanitation—two very important factors in a brewery. These features would allow Sebastian to brew his homebrew and offer it on a larger scale, which at the same time offering the best product he could.
After looking at all that Duramax vinyl panels had to offer, in addition to their trustworthy, quality, and reliable product, Sebastian decided to place his order. In the end, he was very happy with the Duramax vinyl panels and decided it was time to get to work brewing.
Save money with Duramax PVC Panels
Guaranteed to Last 4x as Long as Fiber Reinforced Plastic (FRP Wall Panels)
Find all the Duramax PVC Panel Information You Need Right Here!
Gallery
Useful Links
Any operation that deals with high volumes of liquid must have air-tight structures to avoid complications like contamination, water damage, and mold. Breweries are a...
View More
This blog presumes you’re researching ways to tighten up a brewing operation by finding the best possible solution to handle high-volume liquids. Perhaps you’ve already...
View More
Fiberglass wall panels are the old holdover, first introduced in the 1950s as a means to craft low-maintenance wall panels for places where liquids are...
View MoreTestimonials
Arrived on time and in good condition. They have stayed brand-new white since I installed them.
Alex Beckland, Plano, TX
The sales and customer service at Duramax responded to all my requests speedily
Mitch Locke, Arlington, TX
Have a question? Tell us how we can help.
Sign up for updates and news
