Birds inside the poultry should have access to a healthy environment, food, and clean water. Poultry houses thousands of birds so the interior is filled with water, food grains spilling, poop, feathers, etc. You should maintain the interior to ensure hygiene and good health. It can be very tedious to clean the walls and lead to damage like paint chipping off, moisture-filled walls, damp surfaces, etc. Poultries that are made of wood cannot be cleaned frequently with water. We suggest installing plastic wall panels. 

The panels require occasional maintenance

Poultry panels can look extremely dirty so they require frequent cleaning. The walls can be damaged due to excessive scrubbing and cleaning. This can hamper the interior’s quality, leading to excessive and expensive damage. Install PVC panels on the walls and ceiling because they are easy to clean and need no regular maintenance. Do not apply bleaches or acids as they can harm the panels. Clean the PVC panels using a cleaning agent and a soft cloth to keep the shine on. FRP panels have an uneven texture that attracts impurities and promotes mold growth. The panels attract moisture, so you cannot wipe or wash the surface. So the FRP wallboard is not suitable for poultry interiors. 

Same-day installation

PVC boards can be installed within 7 to 8 hours, so it does not even take more than a day. Only one professional can install the panels within the stipulated time. Vinyl boards are attached to the studs with hidden screws and fasteners. The panels have interlocking tongues and grooves that arrest moisture from entering the panels. They also facilitate faster installation. FRP panel installation is a complex procedure. The panel takes longer to install, and more than one professional is needed to install the panels. FRP panels chip off, crack, and delaminate easily if moisture seeps into the panels. 

PVC panels last for a century

Humidity inside a poultry farm can be detrimental because it damages the interior and makes the birds fall sick. Duramax Panels are 100% water-resistant. This keeps the walls and ceiling protected from moisture seepage. The vinyl panels are covered with an antibacterial covering that prevents mold growth and mildew on the surface. We do not recommend installing FRP panels inside poultry farms or spaces with moisture and humidity. Duramax Panels are made from 100% virgin vinyl of premium quality. Waterproof Duramax Panels are ½ inch thick 16-inch wide; the length can vary according to client requirements. The vinyl boards are long-lasting like no other. PVC sheets can last for more than a lifetime, more than a century. FRP wall panels last only 20-25 years, so the high investment is not worth it. 

White color vinyl panels

Vinyl panels are available in white shade, but we manufacture gray boards upon getting bulk orders. You can use PVC grade paint to color the panels and then focus on the desirable décor. FRP wall panels are colorful but fade away too soon. White PVC vinyl sheets offer a clean and spacious look to the interior. PVC sheets are light-reflective. They distribute the reflected light evenly inside the poultry farm. The distribution of light is a very important factor inside poultry. You do not need to install too many LED lights for sufficient light distribution. Our PVC panels help you to save on your monthly energy bills.  

Durable and resistant PVC boards

Duramax is a renowned brand in the USA that has been manufacturing PVC sheets for more than 40 years. Our products are ASTM-certified and FDA-compliant. The vinyl boards are ½-inch thick and 16 inches wide and the length is customizable. The lightweight panels are easy to transport at an affordable cost. PVC sheets are non-porous and can be recycled without producing much waste material. The PVC panels can endure impacts, abuse, and chemical stains. Your poultry will be safe from fire accidents upon installing vinyl sheets because they have 1-hour Class A fire resistance. Invest in our panels that will not require post-installation repairs. 

Are you sure that FRP panels would help you save money?

The raw FRP sheets are available for $70 which is lower than raw vinyl boards that cost $83.58. FRP panel installation requires additional investment in hiring more than one labor and other materials are required. The final cost comes to $141.50, a huge amount compared to the $5 PVC panel installation cost. So, the total cost of installing a vinyl panel is only $88.58. You spend this little amount and get a solution for a lifetime. Install vinyl sheets and save 40% of the material costs and 50% of the labor expenses. Install Duramax panels; we promise they will not require repairs or replacement. Get the $25,000 money-back guarantee.              

Factory-made PVC panels

Fiber-reinforced plastic was once a popular solution but failed due to the advent of PVC panels. FRP sheets have several downsides due to which they are almost obsolete. Install PVC panels and forget about peeling off, cracking, and delaminating. Duramax Vinyl Panels are USA-made and we have our own factory where the products are manufactured and tested. The plastic wall panels are shipped within 2 weeks at a manufacturer-direct price. PVC board is a suitable replacement for traditional wall and ceiling structures. 

Final words

Ask for a free sample to judge the quality of our vinyl plastic wall panels. Please call us at 323-991-7507 for a zero-cost consultation. Discuss your project with us and we shall respond to your queries. Request a no-obligation quote.

Explore our online inventory and shop online.