Cannabis cultivation has emerged as one of the most popular and a highly-sought after businesses by various entrepreneurs across the United States. The rapid increase in legalization, followed by the use of cannabis to treat chronic illnesses, is the primary factor behind the crop’s dramatic growth. Hemp also served as an essential crop for creating textiles and other products. The crop’s state-approved legalization in 1996 changed its overall cultivation, with cultivators taking to garages and warehouses to build an indoor grow room.

However, most cannabis growers face challenges related to growing the crop indoors, especially because there is a lack of adequate lighting and high-moisture content. Moisture levels exceeding 70% threaten the overall crop quality and ultimately lead to a fall in the business. 

So how is ditching FRP grow wall covering the ideal solution for healthy crop cultivation? 

Get The Adequate Lighting Required for Optimal Cannabis Yield

Every cannabis grow room requires access to sufficient natural light to grow and yield maximum results. Installing FRP grow room wall material isn’t suitable, owing to its non-light reflective nature. But PVC grows room wall panels are worthy of such wet and humid interiors because they can distribute light evenly. The bright light-reflective panels boast a seamless finish and can save you on electricity costs. Initially, vinyl panels can be expensive. However, they can be an excellent money saver in the long run. Furthermore, they can also eliminate the hassle required in installing additional lighting fixtures.

Bidding Goodbye to Mold and Bacterial Growth Becomes a Possibility

Of all other factors, mold, and mildew formation on the wall surface seriously contribute to a disease-ridden and unhealthy grow room environment. Overlooking mold growth for a prolonged time can result in many problems. It can result in bacterial infestation, ultimately hindering the plants’ overall growth and development. Removing such threatening factors from the wall surface becomes easier with PVC grow room panels installation. The anti-mold and anti-bacterial coated panels prevent moisture from seeping through its surface, discouraging mold and fungi growth.

FRP panels cannot prevent moisture-attack and rather end up retaining moisture. Excess moisture infiltration leads the walls to crack, fracture, bend, warp, and even give into discoloration. Faded grow room walls hint at unprofessionalism and inability to maintain required sanitation and hygiene standards inside, prompting you to replace them. Replacing the panels every time it comes in contact with moisture or water means you get to pay lesser attention to your business.

Save Yourself From the Hassle of Hiring Professional Contractors

The overall plastic panel installation feels like a breeze, as you don’t have to consider hiring a professional laborer or paying for any additional material for the process. The moisture-resistant Duramax PVC Panels are easy to fix on the panels; even a novice can get it done without any prior experience in the field. However, things are different when you have chosen FRP panels for your grow room walls. They require the skill of expertise as improper FRP installation might result in a vast array of problems in the future, leading them to delaminate quickly. 

Therefore, lightweight vinyl panels are profitable as they save you 40% on labor and 50% on material costs. Furthermore, by seeking an expert installer’s help, you can get the job done within 7-8 hours, avoiding the loss involved in business downtime.

Focus More on Cannabis Cultivation and Less on Panel Maintenance

One of the worst parts of being an indoor cannabis grower is that you have to maintain maximum hygiene and sanitation standards to ensure proper growth and yield. In addition, maintaining the indoor environment requires you to dedicate considerable time. This means you have to compromise on the time you spare for brand building, customer interaction, and focusing on plant health. Pay attention to the crops to avoid facing challenges in this competitive market. Besides, it might also result in the plant deteriorating over time.

Incorporating the sturdy plastic panel is one way of saving yourself from such hassles. They are easy to maintain and can keep you focused on your business. The white panels don’t attract microbes or dirt, so they never turn yellow. Besides, they don’t need you to invest in expensive and harsh chemical cleaners to retain their shine. A simple wipe-out and occasional hose cleaning can suffice. Unfortunately, FRP’s panel isn’t only laborious and time-consuming, courtesy of its rough surfaces, which need routine scrubbing to get rid of the stubborn dirt.

Keep Your Cannabis Plants Safe from Fire Accidents

Every cannabis grower understands the pain of dealing with misfortunes like fire hazards. Fire-related accidents, even of small magnitude, can result in tremendous loss. Not only does it destroy the patiently-cultivated crop, but also your zeal to overcome the disaster and restart the business from scratch. Class A, 1-hour, fire-resistant commercial PVC panels can keep your interior and plants safe from fire, at least for an hour, offering ultimate mental peace to the growers.

Experience Damage-Proof Grow Room Walls for 100 Years

Repairing dents and scratches on grow room walls are only sometimes feasible, especially for busy entrepreneurs. However, the durable CFIA-certified grow room wall material displays strong, withstanding power against chemicals and water splashes. Wash the panels as often as possible without bothering about moisture seepage, thanks to their waterproofing abilities. They also resist impacts and abuses, which helps them stand the test of time and live for 100 years without any callbacks.

No Dealing with Smelly Cannabis Growing Room

When you have introduced 100% vinyl-made panels to your cannabis grow room, there’s no more stress over a smelly environment. The typical smell of fertilizers, pesticides, and plants fades away as soon as you install odor-resistant plastic panels from Duramax. They are ideal for maintaining the perfect interior for cannabis plants.

Being a cannabis cultivator requires you to look after multiple things, from holding up to your business reputation to consistently cultivating premium-quality cannabis plants. Incorporating Duramax’s USA-manufactured PVC panels into such grow rooms proves extremely beneficial as they meet FDA compliances and are completely safe for use around plants. Furthermore, the ASTM-certified panels are available in ½ inch thickness and can be customized per client requirements. To get a free sample, visit the website.