The time of the FRP panel is gone because PVC panels have conquered their position and are here to stay. Businesses could not find a solution for humid commercial interiors until vinyl panels emerged into the market. FRP panels have failed to provide long-term protection for walls and ceilings as they could not endure many factors. Vinyl panel is a permanent solution for the walls and ceiling, especially where humidity exists.
Comparing FRP vs. PVC, the former follows a simple, stress-free installation process. There are no extra expenses involved related to materials or labor. The PVC panels are attached to the studs with the help of hidden fasteners. These panels are reusable so you save a lot of money. A single contractor can install the 16-inch panels within 7-8 hours. The panels have interlocking tongues and grooves for seamless installation. The panels are ½-inch thick and the length can be customized. Installing PVC panels eliminates the need for OSB, plywood or drywall. There is no gluing and you do not need to replace the panels. The vinyl panels, once installed, do not bend, warp, peel off or delaminate.
FRP panels have complex and expensive installation procedures. The panels peel off and delaminate within a few years. A minimum of two contractors install FRP panels in a couple of days. They have a rough surface that attracts impurities and the uneven surface makes the panels difficult to maintain.
Do you think that installing FRP panels is comparatively cheaper compared to PVC panels? Initially, raw FRP panels cost $70, slightly lower than PVC panels. Duramax Vinyl Panels initially cost $83.58 when you buy them from the store. The difference in the cost is felt after the installation. The cost of PVC panels increases by only $5 after the installation and the total price comes to $88.58. The FRP pricing becomes double to a whopping $141.50. The additional charges include the backers that cost $40, adhesive $6, labor charges $20, panel to panel trim $5.50. The FRP pricing exceeds to a huge extent but it is not a long-lasting solution. Duramax offers affordable and functional solutions for new or retrofit construction.
Vinyl wall and ceiling panels are extremely long-lasting as they have extended shelf-life. These panels can last for a minimum of more than 40-50 years; sometimes the panels can even last for more than 100 years. FRP panels have a shorter lifespan, they do not last for many years and require frequent, expensive repairs.
FRP panels give you no scope of saving while vinyl panels do offer. PVC panels are light-reflective, the panels equally distribute the reflected light. You require installing a lesser number of LED lights. This reduces the monthly energy bills which is a good saving indeed. FRP panels are colorful but they fade away within a few years. PVC panels are white but do not fade or turn yellowish with time. The PVC panels have an even, smooth surface that does not get dirty easily or attract bacteria.
The PVC panels require simple cleaning and no strict regular maintenance. Wipe the panels with a damp cloth and a mild cleaning agent. Do not use abrasives, acids or harsh cleaning agents. Wash the panels when you feel right and do not worry about moisture absorption.
FRP panels are becoming obsolete due to their downsides. Vinyl panels have come up as an FRP alternative. We manufacture panels for various industries like car washes, commercial kitchens, breweries, fisheries, shipping containers, riding stables, etc. Shop for PVC panels online from the Duramax website. Please look on our website and read about PVC panels and why FRP panels are unsuitable for humid commercial interiors. Learn the comparison between FRP vs. PVC panels so you can easily decide. These vinyl panels are shipped to your site directly from the factory within 2 weeks. The PVC panels are customized based on your preferences and budget.
Remove the old FRP panels and replace them with PVC panels. We design customized panels for your project. Our panels come with a $25,000 money-back guarantee. Do not cut corners on money and time when you are looking for a long-lasting solution. Please visit our website to learn more about PVC panels and shop online. Learn about the latest technology and why FRP panels are obsolete. Say goodbye to water infiltration, delamination and poor aesthetics. PVC panels are a modern solution for your commercial walls and ceiling.
Duramax is a leading brand in the US that has been designing and manufacturing PVC panels for more than 40 years. The vinyl panels are made from 100% virgin vinyl. This determines the quality of the panels. Duramax Vinyl Panels are 100% waterproof; they do not absorb moisture or humidity. The panels are coated with an antibacterial coating to prevent the growth of bacteria and mold. Duramax Panels are ASTM-certified, CFIA-certified and FDA-compliant. The panels are equipped with a Class A, 1-hour fire rating. Duramax Panels are lightweight, non-porous and can be recycled. The vinyl panels do not react to chemicals and keep odor away. They are lightweight, can be recycled and can endure impacts. The raw vinyl used determines the quality of the PVC panels.
Do not install FRP panels for humid commercial interiors, especially if you are looking for a permanent solution for the walls and ceiling. Vinyl panels, once installed, do not require replacement. Duramax Panels are made in the US. They are versatile and used for several applications. Businesses prefer Duramax Panels because the panels are certified and pass the inspection. Call us on this hotline for a free consultation – (323) 991 – 7507 from 7:30 am to 4:30 pm. Ask for a free sample of our PVC panels and request a no-obligation quote.
Here’s your chance to get 25% off on your shipping charges plus 5% off your total cart when you buy from Duramax PVC Panels. Use code SUMMER5OFF to order now. Hurry! Order before the offer ends on August 1st, 2022. SHOP NOW!
Our panels are ASTM certified and FDA compliant; also quality checked. We ensured Kevin that the kitchen would be free from the fire outbreak. The panels have a -hour fire grade also chemical resistant.
Duramax is a top wall panel supplier in the USA. Visit our website for a free sample, get a free consultation and request a quote.