If you spend significant time in your garage, you might have noticed that the air is too humid. A moist-ridden garage interior can make feeling comfortable in the space difficult. Apart from causing mold and mildew to grow, excessive moisture can accelerate the process of corrosion and rusting in the vehicles and other goods stored there. Garages have wide entrances, which let snow and rainwater seep through. Moisture can exceed 70% when garages welcome wet vehicles inside. Based on how you use the garage, such spaces always experience dampness, breeding mold, and mildew. When humidity exceeds 60-70%, it can significantly increase the damp conditions. Dealing with moisture problems is difficult but is paramount. Try incorporating PVC panels instead of FRP boards to make it less stressful.

Regardless of the moisture level and humidity, these panels can keep your interior safe from damage. Made of pure vinyl, PVC panels don’t need frequent replacement like conventional wall coverings and save you on maintenance costs. Additionally, the seamless surface of the panels is easy to clean and doesn’t attract dirt, helping you create a professional environment.

PVC Garage Panels Offer Maximum Protection from Moisture Attacks

Many garage owners try using dehumidifiers to collect and extract the excess humidity from the spaces. Despite being an efficient tool to remove physical water from the air and reduce relative humidity, garage dehumidifiers don’t offer long-term solutions. Vinyl-made PVC panels are a better option as they come with a non-porous surface that restricts moisture from entering the facility and stops all the related damages. Because of their unmatched moisture-resistant properties, these sturdy and resilient panels are designed for heavy-traffic and humid interiors. Their smooth surface is not an ideal ground for bacterial and fungal growth. As a result, you gain a dual benefit by choosing PVC panel over FRP panel inside the garage; you stop moisture from damaging the walls and ensure optimal cleanliness.

Get Professional-Looking Garage Walls

Creating a professional garage interior is possible with PVC panels. You face moisture-related concerns when you choose FRP wall boards instead of PVC for your garage. FRP panels cannot resist moisture from seeping through the walls and breaking their structural safety. More so, the FRP boards have a porous surface, which soaks moisture and lets it damage the property. FRP-covered walls cannot sustain cracks, breakdowns, or delamination, leaving you with shabby and outdated interiors. For a damage-free wall, choose PVC instead of FRP. These panels can resist all moisture attacks and are suitable for humidity-prone places. With PVC panels, you get a smooth, attractive, and sleek-looking wall for a lifetime.

Lifelong Freedom from Mold and Mildew: Install Anti-Mold Coated Vinyl Panels

Mold inside the garage results from poor drainage, improper ventilation, and inadequate natural light. When mold settles on the walls, they need you to scrub them thoroughly. To ensure the mold spores don’t spread, you must invest in commercial cleaners, too. If you are tired of tackling mold cleaning regularly, then it is time to upgrade your wall paneling system. PVC wall panels have an anti-mold coating, preventing mold and mildew growth on their surface. Besides, these panels are not integrated with wooden backers, which further helps them stop water absorption. When water no longer seeps through, it doesn’t encourage the growth of fungi. Mold’s absence helps create a safe, healthy, and fresh-smelling garage interior.

Stop Investing in Expensive Cleaners; PVC Panels Need Simple Cleaning Techniques

Traditional wall cladding solutions like FRP wallboard need you to clean them using commercial cleaning agents, which come at a cost. However, despite cleaning them regularly, FRP panels contain crevices that hide bacteria and mold. Unaddressed fungal and bacterial formations become difficult to remove over time and only go if you scrub them aggressively using chemical agents. The use of chemicals is not only harmful to the health of the wall but also for the workers employed there. Vinyl panels need occasional cleaning, and only soap and water are used. This is because the surface of the vinyl panels is smooth, which doesn’t let dirt and debris sit on them. Wiping them down occasionally can retain their sheen for years.

Spend Little Time to Install Vinyl Panels

Unlike any other wall covering, which requires hours to install, PVC panel installation takes minimal time. Vinyl panel installation relies on a modern interlocking tongue and groove system, reducing installation time and saving you on labor and material charges. You need to join FRP panels using surface fasteners and adhesives. As for PVC panels, you can directly attach them to the walls with the help of invisible fasteners and screws.

Recyclable PVC Panels at Competitive Prices

You can order FDA-compliant PVC panels at Duramax PVC Wall Panels at competitive prices. Our panels leave a little carbon footprint and are ideal for all commercial sectors. Since you can recycle our vinyl panels multiple times, they are also counted as one of the most environment-friendly wall-covering solutions in the market.

Customizable PVC Panels with $25,000 Money Back Guarantee

At Duramax PVC Wall Panels, we ensure quick and easy customization of all our panels. You can order our panels online and personalize them according to your requirements. They are available in different construction lengths. Besides, we also give you a money-back guarantee of $25,000 in case you are not happy with our panels or they need replacement and repair in the long run.

Get Stain-Free Walls with Duramax PVC Wall Panels

Duramax PVC Wall Panels is a 40-year-old experienced manufacturer of ASTM-certified vinyl panels in the US. We offer impact-resistant panels that don’t crack, bend, warp, or develop stains on their surface because of external threats and abrasions. As a result, you get a spotless garage interior for a lifetime.

Conclusion

Invest in Duramax PVC Wall Panels instead of FRP to protect your garage walls and ceilings from moisture damage. FRP wall panels are no longer relevant because they cannot withstand high humidity. We ensure a quick dispatch of our panels to your location within two weeks. Visit the website for a quick, professional consultation with our expert team.