Chat with us, powered by LiveChat

It is time to revamp your brewery interior – Install USA-made PVC panels

23 November, 2022

Is your brewery interior looking old and has been affected by dampness? The festive season is around the corner so hurry up and think of a revamp. You are producing tons of liquor that should be safe to consume. Beware of frequent inspections and ensure the interior conditions are suitable for production. Do the interior all over again by installing USA-made PVC panels over the concrete walls. This acts as a barrier not allowing moisture to reach beyond the panels. 

No-hassle cleaning

Your brewery will remain clean and hygienic upon installing vinyl panels. Adding a vinyl wall and ceiling covering keeps the interior in good condition. Duramax sheets are easy to clean and there is no daily maintenance needed. Wipe with a wet fabric and apply the mild cleaner to keep the panels shining. We recommend not to use bleaches, abrasives, or acids of any kind. Washing the panels is no hassle because there is no fear that moisture will seep into the boards. 

Simple and inexpensive installation

Installing USA-made PVC panels is simple and inexpensive. The boards are cut to shape before the installation. The panels are attached directly to the studs with concealed fasteners and screws. The boards are equipped with tongues and grooves in an interlocking manner. This facilitates easier installation. Installing them on the ceiling is also simple. The H divider trim part combines the boards through the length to help spread across full-lengths. The maximum span between the fasteners should be 24 inches like the walls. Horizontal strapping can be done only if required. Duramax’s tongue and groove system prevent water from seeping into the panels. But the installers use pure silicone between the boards and around the trims to arrest moisture. 

White PVC panels

Vinyl panels are ½ inch thick, and the width is 16 inches but the length keeps changing based on the demands. The panels do not have backers so they resist the seepage of moisture and humidity into the panels. The vinyl boards have a truss design that supports the attic load insulation. USA-made PVC panels are available in white color at the Duramax store. We manufacture grey-color panels only upon getting bulk orders. The white color of the panels remains the same without becoming yellowish or tarnished. You can have colorful panels using PVC-grade paint. Please do not invest in colorful FRP boards because they fade out easily within a few months. Vinyl sheets are light-reflective so they distribute the total amount of reflected light equally. Lights inside a brewery are usually low, but installing the panels can save on your energy bills. 

ASTM-certified vinyl sheets

Duramax PVC Panels is a USA-based company that designs modern PVC boards for residential and commercial use. We are more than 40 years old and have offered products to many clients. We have customers from verticals that include grow rooms, restaurants, dairy rooms, car washes, laundries, poultry farms, commercial kitchens, hospitals, warehouses, shipping containers and more. The products are ASTM-certified and have FDA-compliant panels. Drywall, tiles, plywood, mylar and FRP are its biggest competitors. 

PVC panels – water-resistant and environment-friendly

Duramax panels are made from 100% virgin vinyl. The quality of the vinyl used determines the durability of the boards. Duramax sheets are robust and extremely rigid. The boards are entirely water-resistant so there is no scope for moisture to penetrate the walls and ceiling. The surface remains dry and free from mold growth. Also, the panels are coated with an antibacterial covering that prevents the growth of bacteria and microorganisms. The vinyl boards are light in weight so transporting is simple. The surface of the panels does not have porosity. They are tough so the boards endure impacts and abuses. The boards are resistant to chemicals and fire. Vinyl boards are environment-friendly and can be recycled but produce minimal waste. 

Are those old walls cracking and crumbling inside the brewery?

Stop investing any further in FRP panels and get rid of moisture infiltration, delamination, and poor aesthetics. FRP panel is now a thing of the past because its popularity ceased after vinyl made its way into the market. Take off the old FRP sheets that make the walls and ceiling damp and humid. Vinyl has many advantages compared to fiber-reinforced plastic panels or wall-covering material. A vinyl panel is a permanent solution to dampness and humidity issues. 

Long-lasting vinyl sheets

Vinyl sheets are extremely long-lasting. They remain in good condition for 45 to 50 years and sometimes last for more than 100 years. So, these panels are considered a lifetime solution. You invest only once and no other expense is involved after the installation. Save 40% on the total material cost and 50% on the total labor costs by installing Duramax’s PVC panels.

The cost of installing a PVC panel

You have spent a lot of money in setting up your brewery perfectly. Consider spending a little more to add a vinyl wall and ceiling cover for the interior. Vinyl panels might cost you a little more than FRP sheets but the former is a long-term solution. Do you think the $70 FRP sheet is affordable while the $8.58 vinyl panel is not? Spend only $5 for installing a PVC sheet so the total money you spend is $88.58. This is very affordable compared to the very expensive FRP sheet installation that costs the same as the price of the panels.

Final words

PVC boards are manufactured and designed in the USA. We have our own factory from where the boards are shipped to you within 2 weeks. Vinyl sheets do not require frequent repairs or replacement. Duramax offers a $25,000 money-back guarantee post-installation. Book a consultation without any cost to discuss your project. Vinyl panels can help you remodel your commercial space to a new level. Check the quality of our panels by asking for a free sample. Grab the early Black Friday sale and get your panels shipped from our Los Angele factory. Buy PVC panels online from our website. Request for a quote.

EARLY BLACK FRIDAY SAVINGS!
On all VINYL WALL PANELS

5% OFF panels & 25% OFF shipping when you buy from Duramax PVC Panels. Hurry! Order before the offer ends on November 302022. Fast shipping from our Los Angeles factory. SHOP NOW!

Place your order – Request for a quote:

Our panels are ASTM certified and FDA compliant; also quality checked. We ensured Kevin that the kitchen would be free from the fire outbreak. The panels have a -hour fire grade also chemical resistant.

Duramax is a top wall panel supplier in the USA. Visit our website for a free sample, get a free consultation and request a quote.

Have a question? Tell us how we can help.

First Name(Required)
Last Name(Required)
Drop files here or
Max. file size: 10 MB.

    GET A SAMPLE
    GET A SAMPLE
    Save & Share Cart
    Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
    Back Save & Share Cart
    Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
    Your cart email sent successfully :)