A dairy parlor should be clean and hygienic. The health of the dairy animals is also very important. The interior should be well protected so that the dairy animals do not feel the outside heat. To cater to all of these, you need to install a layer of covering over the walls and ceiling. Vinyl sheets do not allow excess moisture to settle on the walls and seep into it to cause major damage to the interior. A little amount of moisture is good for milking. The excess moisture settles on the walls and ceiling to give birth of mold and mildew. Installing dairy wall panels will prevent this condition. Vinyl panels are installed inside grow rooms, commercial kitchens, fisheries, shipping containers, restaurants, stables, warehouses poultries, laundry and more.

Insulation and ventilation

Dairy products are consumed by humans of all ages. Milk should be extracted and stored in a hygienic way. Any mishandling or compromise to meet the hygiene standards can result in perishing of the products. The dairy products as well as the animals survive in a cool and dry environment. The dairy parlor should be well ventilated to ensure proper flow of air. There should be adequate attic ventilation offered over the ceiling insulation to do away with moisture and heat. This prevents the insulation from breaking and keeps the building structure in good condition. The attic ventilation can be natural or fan-powered. Natural ventilation can be provided with a combination of ceiling and wall openings. The rate of ventilation depends on the parlor orientation and dominant winds. Most dairy farms require dehumidification. It is a process to get rid of humidity and dampness but it is not a permanent solution. We recommend install vinyl dairy wall panels for a full-proof solution.

Dealing with heat stress

Heat stress in cows is a very common issue among the dairy cows that cause a lot of health problems. Intense humidity and an increased temperature can give rise to heat stress. A cow that is about to give birth can be affected by higher temperatures than any other dairy animal. Those cows that have been affected by heat stress can suffer from higher respiratory rates and lower conception rates. Their wet skin and the chill of the wind gives a cool feeling to the cows. We recommend installing vinyl covering to keep the dairy animals away from heat stress. You can install other cooling equipment like cooling pads, circulation fans, etc. 

Simple and hassle-free installation

The installation process is simple and hassle-free. The dairy wall panels follow an easy installation process that involves no extra cost of labor or materials. The vinyl sheets are fixed to the studs with the help of screws and fasteners that are not visible. Our PVC boards have tongues and grooves in an interlocking pattern that makes the installation easier. The boards do not have backers so there are no chances of moisture seeping into the dairy wall panels. One installer does the installation within 7 to 8 hours.

The cost comparison – PVC vs FRP panels

Dairy FRP panels are available at $70 which is even less that PVC sheets that are available at $83.58. You might be feeling that FRP sheets are affordable compared to PVC panels. Well, fiber reinforced panels require additional labor and materials during the installation. The cost of installing a FRP board is same as the cost of the panel. So, the total you need to spend is $141.50 on FRP sheets. Vinyl panels can be installed at only $5. Vinyl panels are not very expensive but they are a lifetime solution which FRP Is not. The latter delaminates, warps, cracks, and delaminates upon encountering moisture and humidity.

Waterproof panels

Duramax panels are 100% waterproof so they are suitable for dairy parlors. The surface of the panel is manufactured in a way that it does not let moisture settle on it. This prevents the formation of mold on the surface of the panels. Also, every panel is coated with an anti-bacterial layer that keeps away growth of microorganisms. Duramax boards are white in color but they do not get dirty easily. White panels give adequate brightness to the interior. We manufacture grey panels only upon receiving bulk orders. A white panel made of any other material would not remain as white as vinyl sheets.

Lightweight vinyl boards

Duramax PVC Panels is a renowned company that manufactures premium vinyl panels. We customize vinyl panels for our clients. We have been catering to clients from various industries for the last 40 years and more. Vinyl sheets are ASTM-certified and FDA-complaint, and have other certifications.  

Vinyl boards are lightweight and ½ inch thick which makes them easily transportable. The panels are durable so they can endure impacts and abuses. The surface is not porous at all. The boards have a 1-hour, Class A fire resistivity. This ensures there is no fire hazard inside the dairy setup. The sheets can resist chemical spills as well. The quality of the panel differs from one manufacturer to another. Our vinyl sheets are made of premium virgin vinyl. This ensures prolonged durability of our products.

Vinyl sheets shipped within 2 weeks

Vinyl panels once installed, do not require replacement. We offer the $25,000 money-back guarantee. Our PVC boards are manufactured inside our factory in the USA and they are shipped to your location within 2 weeks. The panels are available at factory-direct prices. We suggest not to install FRP sheets inside your dairy parlor because these boards are not suitable for humid interiors. FRP sheets are almost obsolete and the popularity of vinyl sheets is escalating.

Final words

Please ask us for a free sample of our vinyl panel so that you can check the quality of our vinyl panels. Call us at 323-991-7505. Book a consultation with us and we do not charge you for that. Request for a quote.

EARLY BLACK FRIDAY SAVINGS!
On all VINYL WALL PANELS

5% OFF panels & 25% OFF shipping when you buy from Duramax PVC Panels. Hurry! Order before the offer ends on November 30, 2022. Fast shipping from our Los Angeles factory. SHOP NOW!