The escalating demand for beer is constantly increasing the pressure on breweries to produce fresh and good quality beer barrels. It is not only about hops, the yeast and the malt. The production setup, the process and adequate sanitation also play a big role. The brewing process includes microbial activity at each stage and they are advantageous to the process. But you should be very careful about humidity or the formation of mold inside, which could threaten the product and destroy its consistency. 

Breweries in the USA are acting right towards maintaining hygiene and safety. The interior environment plays a big role in ensuring that the freshly brewed beer is hygienic and the packaging correctly. Most breweries install vinyl panels on the walls and ceiling rather than keeping the inner walls bare or covered with any other material. Vinyl breweries wall panels have proved to be a long-lasting and permanent solution.

No daily maintenance required

You do not have to think of cleaning the brewery walls and ceiling daily when installing vinyl breweries wall panels. The panels are easy to clean and have a smooth and crevices-free surface. PVC panels do not attract dirt and impurities on their surface. The surface repels the growth of bacteria or mold beneath the panels. Clean the panels occasionally with a mild detergent and water. Do not use abrasives or harsh cleaning agents. 

FRP Panels are complex to install

Do you know that breweries FRP Panels are only initially less expensive than PVC panels? Yes, FRP Panels initially cost as low as $70 but the price doubles during the very expensive installation process. You require investing in various materials during the installation process. The backers cost $40, labor $20, adhesive $6 and the panel-to-panel trim costs $5.50. The final price post-installation comes to $141.50, which is pretty high. These panels are not a long-term solution so why incur such a huge amount? FRP Panels are not very easy to install and require hiring more than one labor. 

Easy to install breweries PVC wall panels

PVC Breweries wall panels can be installed easily without any hassle. They do not and do not involve any additional expense. Vinyl panels cost $83.58 initially when you purchase panels from the store. The panels are attached to the studs and have hidden fasteners. Vinyl wall and ceiling panels have interlocking tongues and grooves for seamless installation. The panels can be installed within 7-8 hours inside your brewery. A single experienced contractor can install the panels inside the entire unit.

The cost of the Duramax panels post-installation comes to only $88.58 by adding $5 nominal labor charges. Vinyl panel is an affordable alternative to FRP Panels. It eliminates the requirement for Oriented String Board (OSB) backing panels. There is no messy and time-consuming gluing needed or no second person. This is why the labor cost and material cost come down to half. 

Light-reflective PVC panels

A PVC panel board is lightweight, does not have toxins and can be recycled. The panels can control odor, not react to chemicals, and endure impacts. The panels have fire-resistivity, they have a 1-hour Class A fire rating. The panels are white and they do not turn yellowish with time. Duramax vinyl panels are light-reflective so they can equally distribute the reflected light. This is a benefit as it helps to save on your energy bills. PVC panels can easily last for 45-50 years or even a century. So, it is a lifetime solution. 

Duramax PVC Panels – a brand that you trust

Duramax is a renowned brand operating in the USA for more than 40 years. We manufacture premium PVC panels for commercial use. Some industries we cater to include grow rooms, car washes, commercial kitchens, breweries, shipping containers, etc. The vinyl panels are tested for quality and meet the current industry standards. The PVC panels are ASTM-certified, CFIA-certified and FDA-compliant. Duramax brewery PVC panels are water-resistant and have an antibacterial coating on their surface that prevents mold growth.

Vinyl panels do not have backers so they do not absorb moisture. The panels are made from 100% pure and premium-quality vinyl. Duramax panels are industry-leading and have ½ inch thickness. The vinyl panels have an internal truss design that offers rigidity and strength to support attic load insulation. 

Duramax’s money-back guarantee

Did you install breweries FRP panels inside your brewery which is now delaminating? FRP Panels are not suitable for humid or damp commercial interiors. The panels have backers that soak in moisture and dampness into the walls and ceiling. This damages the walls from the inside which is expensive and sometimes difficult to repair. FRP panels warp, delaminate, crack or peel off. You can save 40% of the material and 50% of the labor costs by installing Duramax’s breweries wall panels.

The panels are shipped to your site directly from the factory within 2 weeks. Order fast for immediate shipping. PVC panels are a lifetime solution and do not require repairs or replacement. We ensure this or give you a money-back guarantee. PVC panels have helped to overcome the drawbacks of FRP panels. 

Final words

You can keep your brewery interior hygienic and well-maintained by installing Duramax’s breweries wall panels. Vinyl panels are gradually replacing the use of traditional wall and ceiling panels. Please refer to our website for information, you can also shop online from our inventory. Get to know why FRP Panels are taking a backseat and becoming obsolete. When installing Duramax PVC panels, you get rid of delamination and water infiltration issues. Installing PVC panels is a modern solution for your commercial interior. 

Book a free consultation today—request a free sample of the brewery PVC panel board to access the quality. Get a quote within a day.